Find the remote codes for the devices you want to set up. You can find the latest codes below:
In addition, remote codes are listed in the Philips RC144 Remote Control User Guide.
Write down the remote codes for the devices you want to set up.
Turn on the device you want to program into your remote, for example if you are programming your remote to control your TV, then turn on the TV.
Press and hold the appropriate device button and press OK.
Release both buttons. The device buttons blink twice.
- Enter the remote code for the device (if there is more than one remote code listed for your equipment, start with the first remote code in the list).
- Point the remote at the device and press the Power button.
- Repeat this procedure for each device you want to program into your remote control.
The device button blinks three times.
Did the device turn off?
Yes: Keep the code you wrote down above for future reference. You may need it again if the remote code is accidentally erased.
No: Repeat these steps using the next remote code listed for your equipment.
Note: If none of the listed codes work for your equipment, you can use your remote to .
N N N N N N N N 30812 C30812 C30812