Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

2025-05-15 06:09:59.169

Verizon Ellipsis™ Jetpack® - MHS800L / MHS800LPP / MHS815L / MHS815LPP - LAN Settings

To configure advanced LAN settings for your Ellipsis Jetpack , view this info.
View this info to configure advanced LAN settings (e.g., IP address, Subnet mask, DHCP address range, etc.) for your Jetpack.
Changing advanced settings may be harmful to the stability, performance and security of the Jetpack. Contact your local IT administrator prior to altering any of these settings.
  2. From the left menu, click
    Jetpack Settings
    .
  3. From the Advanced tab, click
    Continue
    .
  4. Click
    LAN
    .
  5. Enter the desired info into the following fields:
    • IP address
    • Subnet mask
    • Enable DHCP server by clicking the
      ON
      /
      OFF switch
       to enable or disable.
    • DHCP address range
    • Enable IPv6 by clicking the
      ON
      /
      OFF switch
       to enable or disable.
  6. Click
    Save Changes
     (in the lower-right).