Verizon Support
Verizon SignIn Alerts

High Speed Internet

How can I look up my current Actiontec GT704WG wireless network SSID and WEP Key?
Your network's SSID and WEP Key are stored in your Actiontec GT704WG gateway. As long as you know your gateway's user name and password, you can access the security settings where your SSID and WEP Key stored.

Note: The Actiontec security screens and prompts may vary slightly from the directions below, depending on when you purchased your Actiontec router and the version of the firmware loaded on it.

To display your network's SSID and WEP Key:
Download In Home Agent

Figure depicting Address field in Internet Explorer
  1. Open your Web browser and enter in the Address field.

Security settings
  1. Click the Wireless Setup icon. [Show Me]

  2. Enter your user name and password. If you didn't change during initial installation, enter admin as the user name and password as the password.
    • If you have changed your user name and password but have forgotten the new values, you will have to reset your Actiontec GT704WG gateway to the factory defaults and reconfigure your network settings.

  3. When the Wireless Basic Settings screen displays, scroll to the bottom of the page to view the current wireless settings.

  4. Close the configuration window and keep your SSID and WEP key settings in a safe place for future reference.
Privacy SettingsAccept CookiesAccept Cookies Security settingsSecurity settingsSecurity settings SolutionDesc1=17845;
Verizon SignIn Page

Sign in


for personalized, convenient support

Did you know?

Many equipment problems can be fixed in less than
5 minutes!

Make sure your equipment is plugged in and that the power is working in the rest of your house


My Verizon

  • Check Email
  • Add or Change Plan
  • Suspend My Service
  • Apps


Watch Fios