• What happens when I run out of recording space? Once the recording space becomes full, the DVR automatically deletes the oldest shows to make space for new recordings. 
  
  To prevent your DVR from deleting saved shows: 
  
  1. Select Menu from your remote control.
  2. Select Recorded TV.
  3. Choose a program that you want to keep and then select Save Until.
     
• Can I record shows in high-definition? Yes, you can record shows in HDTV and the steps for recording shows are the same as recording shows in standard definition. HDTV, however, uses a larger amount of your DVR's memory, and stores fewer hours of taped recordings.
  
• What if I turn off the television in the middle of a recording? Your DVR bookmarks where you stopped watching the show. When you view the recording again, the program resumes where you left off.

Need more help?
From your remote control, select Menu and then select Help. Alternatively, your remote may have a Help button that provides quick access to help.

1. Press the Menu button on your remote control.

2. Select DVR from the onscreen menu.

3. Select Create Recording from the available options.

4. Select Manual Recording.

5. Enter the appropriate settings for your recording. You'll need to enter the:

• ^{Channel number you want to record.}
• ^{Start date and start time of when you want the recording to start.}
• ^{End time when the recording should stop.}
• ^{Appropriate Recurring setting (every day, every weekday, never, etc.)}

6. After you've selected the Manual Recording Options, select Save.

Your DVR lets you set up a recording that will record the episodes of a TV series. This saves you from having to set up individual recordings for a TV program that you want to regularly record.
There are two ways to set up a TV Series recording:

From the TV Listings in the Guide

1. Press the Menu button on your remote control.
   
2. Select TV Listings.
   
3. Select the method to use to view the TV listings and press OK.
   
4. Navigate to the program you want to record in the TV listings and highlight it.
   
5. Press the Record button on your remote twice. 
   
   The first button press records the program, the second button press records the TV series.
   From the DVR menu in the Guide

1. Press the Menu button on your remote control.
   
2. Select DVR.
   
3. Select Create Recording.
4. Select one of the options and follow the onscreen prompts to set up your series recording.

Tip: In rare instances, you may find that a series recording did not record an episode of a TV series. For more details as to what can cause this issue, see, I set up a series recording but it didn't record.

There can be several reasons why a series recording didn't record an episode of a program:

• The series recording is set to record "first-run" episodes only, and the episode to be recorded was a re-run. 
  
  
• You've run out of space on your DVR and you've set your DVR to not delete the oldest recordings to make room for new recordings.
  
  

Tip: Ideally, you should try to ensure that you have at least 10% free space on your DVR's hard drive when you record new programs. Remember that if you record a program in HD, more hard drive space is required to store that program than the same program if recorded in standard definition.

• The program information in the guide that was provided to Verizon was not unique, and therefore may not record properly. This can happen occasionally with a small number of programs.
  
  To avoid this in the future,set up a manual recording

The TV listings in your Interactive Media Guide are provided to Verizon from a third party service. Sometimes the timing information your DVR receives doesn't match the actual broadcast schedule. This can cause your DVR to not record the first few minutes of a program or stop recording before the program has completely ended
To fix this you can set your DVR to record a few minutes before or after a program's scheduled broadcast time.

To change the length of recording time for a scheduled recording:

1. Press the Menu button on the remote control and select DVR.
2. Select View Schedule.
3. Select the recording in the list and choose Modify Start & End Time.
4. Select the Minutes Early or Minutes Late field. Using the arrow keys, add how many minutes earlier or later you want the DVR to record.
5. Select Save.

To change the length of recording time for a Series Recording:

1. Press the Menu button on the remote control and select DVR.
2. Select Series Manager.
3. Select Manual Series.
4. Select Modify Series.
5. Select Start or End and choose from the options provided to change the recording length of your scheduled Series Recording.
6. Select Yes to accept the modification you've just made.

To delete a recording:

1. Press the Menu button on your remote control.
2. Select DVR.
3. Select Recorded Programs.
4. Select the program you want to delete.
5. Choose Delete.
6. Select Yes (Delete).

While watching Live TV, you can pause and rewind your DVR at any time by pressing the Pause button on your Fios TV remote control.